Expertise built on proven experience
02392 451111
info@coltinfo.co.uk

"E" Series Extruded Louvre

ERD is an extruded Single Bank Louvre System designed for applications requiring ventilation with a good degree of rain defence.

Material

All principal components manufactured from high quality corrosion resistant aluminium alloy.

Blade pitch and angle

Blade pitch and angle: 75mm at 45°

Number of louvre banks

1 (Single bank)

Special Features

Louvre blades shall be roll-formed to an aerodynamically efficient profile and clipped to concealed structural supporting mullions rather than riveted or screwed, to allow for thermal expansion without distortion along their length.

Mullions shall be concealed at maximum 1250mm centres and their points of support along their length shall be in accordance with prevailing site wind pressures (as calculated and specified by a structural engineer) in accordance with BS 6399 Pt. 2. Mullions will be manufactured from 2mm sheet so that the associated supporting steelwork is kept to a minimum.

Performance

The louvre system shall achieve a minimum performance coefficient (Cv) of 0.30 (inlet), 0.29 (extract).

The louvre system shall achieve the following weathering effectiveness when tested at all velocities to EN 13030: 2001:

Class A2 - up to 0m/s suction velocity
Class B2 - up to 1.5m/s suction velocity
Class C2 - up to 2.0m/s suction velocity
Class D2 - up to 3.5m/s suction velocity.

Decorative Finish

Mill finish (Aluminium)
Stoved Polyester powder
Anodised

Coverage

Total coverage: - All exposed surfaces and edges of components and assemblies are coated, excluding fixings and rivets, i.e. the insides of hollow sections will be protected.
Partial coverage: - Only external louvre blades, frames, corners and sills are coated, the remaining components are mill finish.

Ancillary items

Doors
Visible frame double door
Visible frame single door
Concealed frame double door
Concealed frame single door

Turret Units, Circular and Triangular Panels

Please refer to Colt International for further information.

Birdguard
Aluminium
Galvanised
Stainless Steel

Insect Mesh
Aluminium Woven mesh wire treated coloured charcoal grey.

With Insect Mesh, the design should allow for additional resistance to airflow and reduced flow rate performance.

Blanking Panels
Single Skin Aluminium (uninsulated) mill finish
Single Skin Aluminium (uninsulated) with external decorative polyester powder paint finish to match louvres.
Insulated extruded polystyrene 50mm thick in LB Styrofoam or equivalent.

Please contact us for more information relating to the application, specification, installation and servicing of this product.

Subscribe to the blog

© 2017 Colt International Licensing Limited. - People feel better in Colt conditions