Climate Control industrical projects

For a wider selection of projects by building type or principal business activity, please click here

For a selection of projects from around the world, please click here

Day Lewis Ltd.
Croydon

Day Lewis Ltd. Warehouse, Croydon

As one of the UK's leading chemist chains, Day Lewis Ltd. is involved in retail and wholesale pharmaceutical business in UK.

Colt provided a complete heating scheme design based on an internal temperature of 18°C against an external of -4°C. Consequently, the system was designed on the basis of providing a total heat input of 343 kW to achieve these conditions. The Main Contractor for this project was Vascroft.

more

111 Power Road
Chiswick, London

111 Power Road, Chiswick, London

The Light Box is an office building for small and medium enterprises with a stylish urban feel in Chiswick, London

more

BMW
Hams Hall

BMW, Hams Hall

Colt supplied OPV Seefire ventilators for smoke control and natural ventilation to the main production areas and warehouse area, in addition to Colt Braat and OPV Kameleon ventilators over the entrance atrium. Colt Universal Louvre was installed in the plantroom areas, and pre-coated steel louves into cladding panels. Smoke extract fans and ductwork was installed to the basement service trench and technical basement.

more

Didcot Power Station,
Oxfordshire

Didcot Power Station, Oxfordshire

Colt supplied and installed 19 Labyrinth roof ventilators at Didcot Power Station for RWE Innogy plc. Each measured a huge 2.5m wide x 7.2m long, and was finished in a bamboo polyester powder finish.

more

Rugby Cement
Kent

Rugby Cement, Kent

As a condition of the new development plant and equipment inside the 95 metre high Kiln "Pre-Heater Tower" needed to be screened from public view as a building control requirement, and at the same time also needed to have maximum ventilation. The sheer height and width of the building and the heat generated from the Kiln meant that the method of screening needed to meet both functional and aesthetic requirements but also have low maintenance needs.

more

Turbine Surface Technology
Nottingham

Turbine Surface Technology, Nottingham

The Construction Consultants Turner & Townsend required Colt to design a smoke ventilation scheme to protect a large investment in plant and specialist machinery.

The building was naturally sub-divided into three smoke zones with full height compartment walls between each zone, and the requirements for each zone were assessed individually.

more

Stuart Turner Ltd
Henley-on-Thames

Stuart Turner Ltd, Henley-on-Thames

Colt was asked to design and install a ventilation system to improve the working conditions in the new factory area. A mechanical ventilation system comprising low speed Whirlwind powered extract ventilators and attenuated Coltair units designed for localised cooling and heat recovery was installed in June 2005 complete with a control system offering three operating modes including time and temperature control. Positive feedback has been received during the system's first summer of operation.

more

CPD seminars

Top

Back