Car Park Ventilation - Colt Cyclone Induction Jet Fan

Colt Cyclone is a low profile, high velocity induction fan intended to control air movement. Cyclone directs polluted air and smoke towards the extract positions in a car park or service area. It is tested and certified to EN 12101-3.

Features and Benefits

  • Lower excavation costs
  • Lower maintenance
  • Better car park ventilation and security
  • Suitable for use with sprinkler systems
Colt Cyclone Car Park Ventilation system. High velocity induction fan

Cyclone Induction Fan

Cyclone is an induction fan designed for car park ventilation and ventilation of service areas, so as both to reduce levels of polluted air and to assist with the extraction of smoke in the event of a fire.

Such fans use tunnel ventilation technology to eliminate the need for costly and bulky ductwork. Compared to ductwork systems, this may save car-parking spaces, reduce running costs and noise, and make the car park a lighter, less cluttered environment.

Features & benefits

Slimline design – Only 314mm or 258mm deep. This reduces the required headroom in car parks and thus lowers excavation costs.

Certified performance - Cyclone has been exhaustively tested and certified to EN 12101-3 in accredited third party test laboratories and is CE marked. (For more details see below).

Durable construction – Cyclone is manufactured from hot dipped galvanized casing with the option of a polyester powder coating to any RAL colour.

Low maintenance – With the additional advantage that there is no ductwork to clean.

High thrust – With a higher thrust, each fan can ventilate a significantly higher floor area. This means that fewer units are required than with conventional impulse units. Fewer units mean lower cabling and control requirements as well as lower installation and maintenance costs.

Speed options - Suitable for either two speed or variable speed operation, depending on the application. Where the unit is inverter (variably) controlled, the amount of power consumed is reduced.

Design service - Colt provides a pre-order design service. Please contact Colt for more information relating to the application, specification, installation or servicing of Cyclone.

Cyclone 2
Cyclone has been exhaustively tested and certified to EN 12101-3

Scheme Design

Each car park is different and Colt will provide a scheme design to suit the exact requirements of the project. Colt Car Park Ventilation Systems include one or more of the following elements:

  • Natural inlet through the entrance/exit ramps/fixed ventilation louvres.
  • Extract by a ducted system with dual fans discharging to atmosphere.
  • Air distribution and mixing within the car park by a network of Cyclone Induction Fans or Jetstream Impulse Fans.

As part of a designed scheme involving detection, controls and extract units, Cyclone adds momentum to the air to thrust it towards an extract point.

In general, for day to day operation the control system monitors the levels of pollutants within the car park and once a set point has been reached the system increases the ventilation rates. In a fire situation, once a signal from the fire alarm has been received, ventilation rates are increased.

Product details

Please see the specification for all options:

Certification

Cyclone 100, Cyclone 50 and their standard isolators fully meet the F300 time/ temperature classifications of EN 12101-3 (300°C continuous operation for one hour). Test Certificates are available on request.

Noise output

CIBSE Guide Volume A: 1999, Environmental Design, sets out a recommended maximum noise level of NR55 in car parks. Colt car park systems can be designed to achieve these noise levels if required.

Product:

Colt Cyclone Car Park Ventilation Induction Jet Fan

Leaflet and Datasheet:

Specifications:

Projects: